Listening To The Sound Without Any Adjustment (Analog Direct); Resetting Sound Fields To The Initial Settings - Sony STR-DH700 Operating Instructions Manual

Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
INPUT SELECTOR
?/1
TONE INPUT SELECTOR
SPEAKERS
TONE MODE INPUT MODE TUNING MODE TUNING
PHONES
2CH/
A.DIRECT
1
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
2
Press 2CH/A.DIRECT
repeatedly on the receiver to
select "A.DIRECT".
The analog audio is output.
To cancel ANALOG DIRECT
Press 2CH/A.DIRECT on the receiver again.
You can also press any sound field buttons.
Notes
• When headphones are connected, "HP DIR"
appears on the display.
• This function is not available when DMPORT and
DVD input is selected.
60 GB
MASTER VOLUME
MEMORY/ 2CH/
A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
ENTER A.DIRECT
VIDEO 2 IN
AUTO CAL MIC VIDEO L AUDIO R
Sound field
buttons
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
?/1
?/1
TONE INPUT SELECTOR
SPEAKERS
TONE MODE INPUT MODE TUNING MODE TUNING
PHONES
2CH/A.DIRECT
1
Press ?/1 to turn off the power.
2
While holding down 2CH/
A.DIRECT, press ?/1.
"S.F. CLR." appears on the display and
all sound fields are reset to their initial
setting.
MASTER VOLUME
MEMORY/ 2CH/
ENTER A.DIRECT A.F.D. MOVIE MUSIC DISPLAY DIMMER MUTING
VIDEO 2 IN
AUTO CAL MIC VIDEO L AUDIO R