Changing The Display - Sony STR-DH700 Operating Instructions Manual

Listening/watching a connected
component through DMPORT
connection
1
Press DMPORT.
You can also use the INPUT SELECTOR
on the receiver to select "DMPORT".
2
Start playback of the connected
component.
The sound is played back on the receiver
and the image appears on the TV.
For details, refer to the operating
instructions supplied with the DIGITAL
MEDIA PORT adapter.
Notes
• Depending on the type of DIGITAL MEDIA
PORT adapter, you can operate the connected
component by using the remote. For details on the
remote button operation, see page 12.
• Be sure you have connected the MONITOR OUT
of the receiver to the TV (page 83).
Tip
When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press MUSIC repeatedly to select
"PORTABLE" (page 57).
84 GB

Changing the display

You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows.
All inputs except the FM and AM
band
Index name of the input
t Sound field currently applied
FM and AM band
Program Service name
a)
t Frequency t Program Type
name
b)
indication t Radio Text indication
Current Time indication (in 24-hour system
b)
mode) t Sound field currently applied
a)
Index name appears only when you have assigned
one to the input or preset station (page 36, 64).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
b)
During RDS reception only (models of area code
CEL, CEK only) (page 65).
Note
Character or marks may not be displayed for some
languages.
a)
t Selected input
b)
or preset station
b)
t