Sony STR-DH700 Operating Instructions Manual page 74

Establishing sound transmission
between the S-AIR main unit and
S-AIR sub unit (ID setting)
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each unit.
1 2
4 5
7 8
>10
-
0/10
CLEAR
DISPLAY
,
V/v/B/b
O
RETURN/EXIT
TV CH –
REPLAY ADVANCE
PRESET –
<
.
To set the ID of the S-AIR main
unit
1
Press AMP MENU.
"1-LEVEL" appears on the display.
2
Press V/v repeatedly to select
"9- S-AIR".
3
Press or b to enter the menu.
4
Press V/v repeatedly to select "ID
SETUP".
5
Press or b to enter the parameter.
6
Press V/v repeatedly to select the ID
(A, B or C) you want, then press
To exit the menu
Press AMP MENU.
74 GB
THEATRE
3
DVD/BD
MENU
6
AUTO CAL
D.TUNING
9
D.SKIP
MEMORY AMP MENU AMP
ENTER
MENU
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
MENU/HOME
TV CH +
PRESET +
<
>
To set the ID of the S-AIR sub
unit
Be sure to match the ID on S-AIR sub unit you
want to the S-AIR main unit.
For details on setting the ID of the surround
amplifier and S-AIR receiver, refer to the
operating instructions supplied with the
surround amplifier and S-AIR receiver.
Sound transmission is established as
follows (example):
S-AIR main unit
ID A
ID A
S-AIR sub unit
Notes
• Sources with copyright protection may not be
playable on S-AIR sub unit.
• When sound transmission is established
– sound can only be output from the S-AIR
receiver if you connect the components to this
receiver via the analog jacks. The sound cannot
be output if the components are connected to the
COAXIAL, OPTICAL or HDMI jacks on this
receiver.
– the headphones function on the surround
amplifier is not available.
.
Other S-AIR main
unit
ID B
ID A ID B
S-AIR sub unit
S-AIR sub unit