Listening To The Sound Without Any Adjustment (Analog Direct); Resetting Sound Fields To The Initial Settings - Sony STR-DH500 Operating Instructions Manual

Listening to the sound
without any adjustment
(ANALOG DIRECT)
You can switch the audio of the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
2CH/A.DIRECT
Be sure to use the buttons on the receiver for
this operation.
I/C,)
1
Press I/CJ to turn off the power.
2
While holding down 2CHI
A.DIRECT, press I/CJ.
"S.F. CLR." appears on the display and
all sound fields are reset
to
their initial
setting.
Resetting sound fields to
the initial settings
2CHI Sound field
A.DIRECT buttons
Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
You can also use the input buttons on the
remote.
INPUT
SELECTOR
1
2
Press 2CH/A.DIRECT
repeatedly to select
"A. DIRECT".
The analog audio is output.
To cancel ANALOG DIRECT
Press 2CHlA.DIRECT on the receiver again.
You can also press any sound field buttons.
Notes
• When headphones are connected, "HP DIR"
appears on the display.
• You cannot select ANALOG DIRECT when you
select BD, DYD and DMPORT as input.
44
US