Sony STR-DH500 Operating Instructions Manual page 7

About the indicators on the display
1 2
LFE
SW
L C R
SL S SR
q;
Name Function
A SW
Lights up when subwoofer
selection is set to "YES" (page
40) and the audio signal is
output from the SUBWOOFER
jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C Input
Light up to indicate the current
indicators input.
OPT
Lights up when BD input is
selected. However, "NO
INPUT" appears on the display
if no digital signal is input
through the OPTICAL jack.
"OPT" also lights up when
SAT input is selected if INPUT
MODE is set to "AUTO" and
the source signal is a digital
signal being input through the
OPTICAL jack.
COAX
Lights up when DVD input is
selected. However, "NO
INPUT" appears on the display
if no digital signal is input
through the COAXIAL jack.
HDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack (page 18).
3 4
OPT HDMI DTS
COAX
5
MEMORY
RDS
MONO SLEEP ST
D.RANGE
9
Name Function
D DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is set to
"AUTO" (page 56).
E Tuning
Lights up when using the
indicators
receiver to tune in radio
stations (page 50), etc.
MEMORY
A memory function, such as
Preset Memory (page 52), etc.,
is activated.
RDS
A station that provides RDS
services is tuned in.
Note
"RDS" appears for models of
area code CEL, CEK, RU only.
MONO
Monaural broadcast
ST Stereo broadcast
A preset station number
appears when the preset radio
station is selected.
Note
The preset station number will
change according to the preset
station you select.
For details on presetting radio
stations, see page 52.
5 6
PLII
D
8 7
continued
7 GB