Download  Print this page

8: Adjusting The Speaker Levels And Balance (test Tone) - Sony STR-DH500 Operating Instructions Manual

Multi channel av receiver.
Hide thumbs

Advertisement

Table of Contents
8: Adjusting the speaker
levels and balance
(TEST TONE)
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
TV INPUT
SLEEP
DMPORT
VIDEO
BD
TV
2CH
A.F.D.
1
2
4
5
7
8
>10/
-
0/10
CLEAR
DISPLAY
V/v/B/b,
RETURN/EXIT
1
Press AMP MENU.
"1-LEVEL" appears on the display.
2
Press
or b to enter the
menu.
3
Press V/v repeatedly to select
"T. TONE".
4
Press
or b to enter the
parameter.
28
GB
TV ?/1
?/1
AV ?/1
SYSTEM STANDBY
DVD
SAT
Input
SA-CD/CD
TUNER
buttons
MOVIE
MUSIC
DVD/BD
MENU
3
D.SKIP
6
D.TUNING
9
AMP
MEMORY AMP MENU
ENTER
MENU
TOOLS/
OPTIONS
MUTING
TV VOL
MASTER VOL
MASTER
VOL +/–
MENU/HOME
5
Press V/v repeatedly to select
"T. TONE Y".
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t
Subwoofer
6
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting the level
(LEVEL menu)" (page 36).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value is shown on the display
during adjustment.
7
Repeat steps 1 to 5 to select
"T. TONE N".
You can also press any input buttons.
The test tone turns off.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
Note
The test tone does not work when ANALOG
DIRECT is selected.

Advertisement

Table of Contents

   Related Manuals for Sony STR-DH500

This manual is also suitable for:

Str dh500 - a/v receiver

Comments to this Manuals

Symbols: 0
Latest comments: