Table of Contents
Advertisement
Figure 10
Left side shown
1. Pivot frame hole
2. Washer
3. Hairpin cotter
6. Insert the bent ends of the rods into the
attachment mount as shown in
secure the end of each rod with a washer and
hairpin cotter.
g028306
4. Support rod
5. Keyed slot, existing
6. Bent, flared end of rod
Figure 10
and
4
Installing the Latch Rod
Parts needed for this procedure:
1
Latch rod
1
Hairpin cotter
Procedure
Install the latch rod with a hairpin cotter
1. Hairpin cotter
5
Assembling the Bagger Top
Parts needed for this procedure:
1
Bagger top
1
Bagger screen
Procedure
1. Turn the bagger top over.
2. Install the screen as shown in
it slopes down toward the collection bags.
Note:
Make sure the screens snap into place
and the tabs engage the bagger top.
9
(Figure
Figure 11
2. Latch rod
Figure 12
11).
g033027
and that
Advertisement
Table of Contents
