Table of Contents
Advertisement
2
1
5
Figure 16
1. Deflector assembly
2. Locknut (existing; retain)
3. Locknut (existing; reuse)
2. Remove the deflector assembly.
Note:
Retain all parts to convert the mower
deck to side discharge.
3. Locate and install the angled cutoff baffle to the
mower deck at the rear holes in the mower deck
(Figure
17).
Note:
Use the existing fasteners from that
location to secure the angled cut off baffle to the
mower deck.
3
4
G013095
g013095
4. Carriage bolt (existing;
reuse)
5. Carriage bolt (existing;
retain)
9
8
7
G013096
1. Hole in front wall of the
mower deck
2. Locknut
3. Horizontal post, curved
baffle
4. Vertical post, curved baffle 9. Locknut (existing; reuse)
5. Curved baffle
4. Install the curved baffle to the mower deck
(Figure
17).
A. Align the vertical post in the curved baffle
with center, forward hole in the mower deck
and the horizontal post with the hole in the
front wall of the mower deck.
B. Secure horizontal post to the front wall of
the mower deck using a locknut.
5. Install the chute to the mower deck.
Note:
Ensure that the opening in top of the
chute aligns with the exposed post on the
mower deck top and the forward vertical plate
mates with the folded metal bracket of the chute
(Figure
18).
12
10
1
4
6
5
Figure 17
6. High-lift blade
7. Carriage bolt (existing;
reuse)
8. Angled cutoff baffle
10. Center, forward hole in
mower deck
2
3
g013096
Advertisement
Table of Contents
