Table of Contents
Advertisement
Figure 3
Cutaway view
1. Weight-tray mount
2. Bolt (3/8 x 1 inch)
2. Use the 2 carriage bolts (3/8 x 1 inch) and flange
nuts to secure the weight tray to the mounts
(Figure
4).
Figure 4
1. Carriage bolt (3/8 x 1 inch) 3. Weight-tray
2. Weight-tray mount
3. Insert the suitcase weight into the weight tray
with the groove side facing toward the front of
the machine
(Figure
3. Flange nut (3/8 inch)
4. Self-tapping bolt (5/16 x
3/4 inch)
4. Flange nut (3/8 inch)
5).
g196533
1. Retaining rod
2. Weight-tray
4. Insert the retaining rod into the tray and rotate it
into the locked position
Important:
Remove the suitcase weight whenever
you remove the bagger attachment.
3
Installing the Attachment
Mount
Parts needed for this procedure:
1
Stabilizer bracket
2
Carriage bolt (5/16 x 3/4 inch)
4
Locknut (5/16 inch)
2
Self-tapping screw (5/16 x 3/4 inch)
2
Bolt (5/16 x 1 inch)
1
Pivot frame
2
Hairpin cotter
2
Rod
2
Washer
1
Draw-bar decal
Procedure
1. Install the stabilizer bracket to the engine guard
using 2 carriage bolts (5/16 x 3/4 inch) and 2
locknuts (5/16 inch) as shown in
7
Figure 5
3. Suitcase weight
(Figure
5).
Figure
6.
Advertisement
Table of Contents
