Table of Contents
Advertisement
Dial/Add Contact
End Call/Remove Party
from Conference
Backspace
Navigation Keys:
Up/Down/Left/Right
Power On/Off
* / Record
# / Information
Shortcut Key: Red
Shortcut Key: Yellow
Shortcut Key: Blue
Firmware Version 1.0.0.X
Press the key to delete input characters.
OK
LCD prompt shows the following three optios upon pressing
this key:
Press each shortcut key for designated functions on different
screen context.
Note:
Pressing the red and blue shortcut keys together for about 4
seconds will capture a screenshot of the LCD display.
Home
Press the key to go back to home screen.
Menu
Press the key to view more options.
Press the key to go back to the previous screen or exit the
Back
current screen.
Volume -
Turn down the device volume.
Volume +
Turn up the device volume.
GVC3200 User Guide
Access the dial screen by default when GVC is in standby
mode.
Enter phone number and press the key to dial out.
Access the invite screen to add members in a conference.
Press the key to bring out the backstage conference.
Delete members in conference.
Hang up the conference.
Adjust cursor movement.
Control PTZ movement in camera mode.
Confirm operations.
Bring up the soft keypad when the cursor is in an input
box.
Put the GXV3200 into sleep mode.
Power Off.
Reboot.
Input * in input field.
Used as "." when dialing direct IP call.
e.g., 192.168.40.5.
Start/stop recording in camera control mode.
Start/stop recording in a call.
Input "#" in input field.
Used as ":" when dialing direct IP Cal
e.g., 192.168.40.5:5060.
Input "#" on dialing screen to use it as REDIAL key.
Display call details on call screen during a call.
Display system status when the GVC3200 is idle.
Page 20 of 86
Advertisement
Table of Contents
