Presentation Of Information; Safety Instructions - Bosch rexroth SYDFE1 2X Series Operating Instructions Manual

About this documentation | Pressure and flow control system SYDFE1 series 2X, 3X
Title
Installation, commissioning and maintenance of hydraulic
systems
1.3

PRESENTATION OF INFORMATION

In order that this documentation allows you to work directly and safely with your
product, standardized safety notes, symbols, terms, and abbreviations are used.
For a better understanding, they are explained in the following sections.
1.3.1

Safety instructions

In this documentation, safety instructions precede a sequence of activities
whenever there is a risk of personal injury or damage to equipment. The hazard
avoidance measures described must be observed.
Safety instructions are structured as follows:
Type and source of danger
Consequences in case of non-compliance
▶ Hazard avoidance measures
▶ <Enumeration>
• Warning symbol: draws attention to a hazard
• Signal word: identifies the degree of hazard
• Type and source of danger: Specifies the type and source of danger
• Consequences: describes the consequences in case of non-compliance
• Precautions: states, how the hazard can be avoided
Table 2: Hazard classifications according to ANSI Z535.6-2011
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
Document no. Document type
RE 07900 Data sheet
SIGNAL WORD
Meaning
Indicates a hazardous situation which, if not avoided, will
certainly result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Damage to property: The product or the environment could
be damaged.
RE 30011-B, Edition 10.2021, Bosch Rexroth AG
7/96