A
S
BOUT THE
YSTEM
System Rear I/O
Table 5: System Rear I/O Definition
N
.
ICON
O
1.
Dedicated NIC
2.
VGA connector
3.
USB 3.0 port
4.
5.
Identification LED
6.
Micro USB port
PFR Status LED
7.
(Only for certain
models)
8.
MicroSD slot
Power Sub-System
Figure 1-5. PSU to Mainboard Module Description
A single power supply unit (default) is supplied in the system. A secondary PSU is available
for redundancy functionality.
Figure 1-4. System Rear I/O
NAME
Dedicated RJ45 connector
Maximum display resolution: 1920x1200 32bpp@60Hz
(reduced blanking)
USB 1 port; connect to USB device
USB 0 port; connect to USB device
Blue blinking - Identifier; Off - Normal
Transmit in serial signal for debug or terminal concentrator
Off: Power Off/PFR Module is not installed
Green On: Authenticated
Amber On: Failed
Amber Blinking: Authentication /Recovery is executing in T-1
Backup BMC SEL.
S
YSTEM
D
ESCRIPTION
R
V
EAR
IEW
1-9