SMC Networks ZSE20A Operation Manual page 68

Displayed value is not
correct
The Display
measurement unit
cannot be changed.
Buttons do not work.
The body of the
pressure switch has
become loose.
There is noise.
Copy function error.
Refer to Trouble No.19
-67-
The display is
unstable.
The display turns OFF.
The display is missing.
Display flashes.
There are differences
in the displayed values
when using more than
one pressure switch.
The display accuracy
does not meet the
specifications.
Not able to copy.
Copy error [Er13] is
displayed on the slave
side pressure switch.
Refer to Trouble No.8
Refer to Trouble No.9
Refer to Trouble No.9
Refer to Trouble No.10
Refer to Trouble No.11
Refer to Trouble No.12
Refer to Trouble No.13
Refer to Trouble No.14
Refer to Trouble No.15
Refer to Trouble No.16
Refer to Trouble No.17
Refer to Trouble No.18
No.PS※※-OMU0003-C