Table of Contents
Advertisement
Battery Replacement and Disposal
When the low battery
accurate readings are still possible in this condition; however batteries should be replaced as soon
as possible:
1.
Remove the two (2) Phillips screws from the rear of the meter (directly above the top of the tilt
stand).
2.
Remove and safely place the battery compartment and screws where they will not be damaged
or lost.
3.
Replace the six (6) 1.5V 'AA' batteries observing polarity.
4.
Replace the battery compartment cover with the two (2) Phillips screws.
All EU users are legally bound by the battery ordinance to return all used batteries to
collection points in your community or wherever batteries / accumulators are sold! Disposal
in the household garbage is prohibited!
icon appears on the LCD, the batteries must be replaced. Several hours of
9
SDL310-EU-EN-V1.1-6/11
Advertisement
Table of Contents
Need help?
Do you have a question about the EXTECH SDL310 and is the answer not in the manual?
Questions and answers