Removing The Chassis Cover - Supermicro SC116 Series User Manual

SC116 Chassis Manual
5-3

Removing the Chassis Cover

1
2
Removing the Chassis Cover:
1. Power down the system and remove the power cords from the rear of the
power supplies.
2. Simultaneously press down on the two release buttons on the chassis cover.
3. Slide the cover toward the rear of the chassis.
4. Lift the cover off the chassis.
Warning: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and
prevent overheating.
4
Figure 5-1. Removing the Chassis Cover
1
2
5-2
3