Removing The Chassis Cover - Supermicro SC825M Series User Manual

SC825M(B) Chassis Manual
5-3

Removing the Chassis Cover

Remove this Screw
Removing the Chassis Cover:
1. Power down the system and remove the power cord from the rear of the power
supply as described in Section 5-2.
2. Remove the two screws holding the chassis in place.
3. Slide the cover toward the rear of the chassis and lift the cover from the unit.
Caution: Except for short periods of time, do not operate the server without the
cover in place. The chassis cover must be in place to allow proper airflow and to
prevent overheating.
Figure 5-1. Removing the Chassis Cover
Remove this Screw
5-2