Supermicro SC113MFAC2-605CB User Manual
  1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Chassis
  5. SC113MFAC2-605CB
  6. User manual

Supermicro SC113MFAC2-605CB User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SC113M
CHASSIS SERIES
SC113MFAC2-605CB
SC113MFAC2-R606CB
SC113MTQ-563CB
SC113MTQ-600CB
SC113MTQ-330CB
SC113MTQ-R400CB
USER'S MANUAL
1.1

Advertisement

Table of Contents
loading

Related Manuals for Supermicro SC113MFAC2-605CB

Summary of Contents for Supermicro SC113MFAC2-605CB

  • Page 1 SC113M CHASSIS SERIES SC113MFAC2-605CB SC113MFAC2-R606CB SC113MTQ-563CB SC113MTQ-600CB SC113MTQ-330CB SC113MTQ-R400CB USER’S MANUAL...
  • Page 2 This product, including software and documentation, is the property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted by the terms of said license.
  • Page 3 SC113M chassis. Installation and maintenance should be performed by experienced technicians only. Supermicro’s SC113M 1U chassis packages outstanding high-end performance into an astonishingly short 20” deep chassis, featuring advanced airflow/thermal design for space-limited applications. With its short depth, it efficiently packages eight hot-swappable 2.5”...
  • Page 4 SC113M Chassis Manual Manual Organization Chapter 1 Introduction The introduction provides a checklist of the main components included with this chassis and describes the main features of the SC113M chassis. This chapter also includes contact information. Chapter 2 Standardized Warning Statements for AC Systems This chapter lists warnings, precautions, and system safety.
  • Page 5 Appendix A Cables This section references cables, which are compatible with your SC113M system. Refer to our website for additional information on cabling at www.supermicro.com. Appendix B Power Supply This chapter lists supported power supply information for your SC113M system.

  • Page 6: Table Of Contents

    Table of Contents Chapter 1 Introduction Overview ......................1-1 Shipping List ....................1-1 Contacting Supermicro ..................1-2 Returning Merchandise for Service..............1-3 Chapter 2 Standardized Warning Statements for AC Systems About Standardized Warning Statements ............2-1 Warning Definition ................... 2-1 Installation Instructions ..................
  • Page 7 Preface Installing the Air Shroud .................4-11 Checking the Airflow ..................4-12 Completing the Installation ................4-13 4-10 System Fans ....................4-14 4-11 Power Supply ....................4-16 Replacing a Fixed Power Supply ..............4-16 Replacing a Redundant Power Supply ............4-17 Chapter 5 Rack Installation Overview ......................

  • Page 8: Chapter 1 Introduction

    Chapter 1 Introduction Overview Supermicro’s SC113M 1U chassis featues 8 hot-swappable 2.5” SAS/SATA hard drive bays. Only SAS or enterprise HDDs are recommended. The SC113M chassis. includes a 330, 400, 560 or 600 Watt high-efficiency power supply and one slim DVD-ROM drive.

  • Page 9: Contacting Supermicro

    Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Website: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML...

  • Page 10: Returning Merchandise For Service

    (http://www.super- micro.com/support/rma/). Whenever possible, repack the chassis in the original Supermicro carton, using the original packaging material. If these are no longer available, be sure to pack the chassis securely, using packaging material to surround the chassis so that it does not shift within the carton and become damaged during shipping.
  • Page 11 SC113M Chassis Manual Notes...

  • Page 12: Chapter 2 Standardized Warning Statements For Ac Systems

    The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury. Should you have questions or experience difficulty, contact Supermicro's Technical Support department for assistance. Only certified technicians should attempt to install or configure components.
  • Page 13 SC113M Chassis Manual Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut.
  • Page 14 Warning Statements for AC Systems ‫جسذٌة‬ ‫اصابة‬ ً‫تتسبب ف‬ ‫حالة ٌوكي أى‬ ً‫اًك ف‬ ‫خطز‬ ًٌ‫ٌع‬ ‫هذا الزهز‬ !‫تحذٌز‬ ‫الذوائز‬ ‫بالوخاطز الٌاجوة عي‬ ‫ي على علن‬ ، ‫ك‬ ‫هعذات‬ ‫تعول على أي‬ ‫قبل أى‬ ‫الكهزبائٍة‬ ‫حىادث‬ ‫أي‬ ‫وقىع‬ ‫وٌع‬ ‫ل‬ ‫الىقائٍة‬...

  • Page 15: Installation Instructions

    SC113M Chassis Manual Installation Instructions Warning! Read the installation instructions before connecting the system to the power source. 設置手順書 システムを電源に接続する前に、 設置手順書をお読み下さい。 警告 将此系统连接电源前,请先阅读安装说明。 警告 將系統與電源連接前，請先閱讀安裝說明。 Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación.

  • Page 16: Circuit Breaker

    Chapter 2 Warning Statements for AC Systems Circuit Breaker Warning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V, 20 A. サーキッ ト ・ ブレーカー この製品は、 短絡 （過電流） 保護装置がある建物での設置を前提としています。 保護装置の定格が250 V、...

  • Page 17: Power Disconnection Warning

    SC113M Chassis Manual 경고! 이 제품은 전원의 단락(과전류)방지에 대해서 전적으로 건물의 관련 설비에 의존합니다. 보호장치의 정격이 반드시 250V(볼트), 20A(암페어)를 초과하지 않도록 해야 합니다. Waarschuwing Dit product is afhankelijk van de kortsluitbeveiliging (overspanning) van uw electrische installatie. Controleer of het beveiligde aparaat niet groter gedimensioneerd is dan 220V, 20A.
  • Page 18 Chapter 2 Warning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema. Attention Le système doit être débranché...

  • Page 19: Equipment Installation

    SC113M Chassis Manual Equipment Installation Warning! Only trained and qualified personnel should be allowed to install, replace, or service this equipment. 機器の設置 トレーニングを受け認定された人だけがこの装置の設置、 交換、 またはサービスを許可 されています。 警告 只有经过培训且具有资格的人员才能进行此设备的安装、更换和维修。 警告 只有經過受訓且具資格人員才可安裝、更換與維修此設備。 Warnung Das Installieren, Ersetzen oder Bedienen dieser Ausrüstung sollte nur geschultem, qualifiziertem Personal gestattet werden.

  • Page 20: Restricted Area

    Chapter 2 Warning Statements for AC Systems Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, vervangen of hersteld door geschoold en gekwalificeerd personeel. Restricted Area Warning! This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security.

  • Page 21: Battery Handling

    SC113M Chassis Manual ‫אזור עם גישה מוגבלת‬ !‫אזהרה‬ ‫יש להתקין את היחידה באזורים שיש בהם הגבלת גישה. הגישה ניתנת בעזרת‬ .)'‫כלי אבטחה בלבד (מפתח, מנעול וכד‬ ‫محظورة‬ ‫مناطق‬ ٍ‫نتركُبها ف‬ ‫هذه انىحذة‬ ‫تخصيص‬ ‫تم‬ ،‫أداة خاصت‬ ‫من خالل استخذاو‬ ‫فقط‬ ‫محظورة‬...
  • Page 22 Chapter 2 Warning Statements for AC Systems Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant.

  • Page 23: Redundant Power Supplies

    SC113M Chassis Manual Redundant Power Supplies Warning! This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. 冗長電源装置 このユニッ トは複数の電源装置が接続されている場合があります。 ユニッ トの電源を切るためには、 すべての接続を取り外さなければなりません。 警告 此部件连接的电源可能不止一个，必须将所有电源断开才能停止给该部件供电。 警告 此裝置連接的電源可能不只一個，必須切斷所有電源才能停止對該裝置的供電。 Warnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle Verbindungen entfernt werden.

  • Page 24: Backplane Voltage

    Chapter 2 Warning Statements for AC Systems ‫امداد الطاقة‬ ‫بوحدات‬ ‫عدة اتصاالت‬ ‫جهاز‬ ‫ال‬ ‫يكون لهذا‬ ‫قد‬ ‫الكهرباء‬ ‫عن‬ ‫وحدة‬ ‫ال‬ ‫لعسل‬ ‫كافة االتصاالت‬ ‫يجب إزالة‬ 경고! 이 장치에는 한 개 이상의 전원 공급 단자가 연결되어 있을 수 있습니다. 이 장치에 전원을...

  • Page 25: Comply With Local And National Electrical Codes

    SC113M Chassis Manual ‫מתח בפנל האחורי‬ !‫הרה‬ ‫אז‬ ‫קיימת סכנת מתח בפנל האחורי בזמן תפעול המערכת. יש להיזהר במהלך‬ .‫העבודה‬ ‫اللىحة‬ ‫أوالطاقة المىجىدة على‬ ‫التيار الكهزبائي‬ ‫مه‬ ‫خطز‬ ‫هناك‬ ‫هذا الجهاس‬ ‫خدمة‬ ‫كه حذرا عند‬ ‫يعمل‬ ‫النظام‬ ‫عندما يكىن‬ 경고! 시스템이...

  • Page 26: Product Disposal

    Chapter 2 Warning Statements for AC Systems Attention L'équipement doit être installé conformément aux normes électriques nationales et locales. ‫תיאום חוקי החשמל הארצי‬ !‫אזהרה‬ ‫הציוד חייבת להיות תואמת לחוקי החשמל המקומיים והארציים‬ ‫התקנת‬ ‫المتعلقة‬ ‫المحلية والىطىية‬ ‫قىاويه‬ ‫يجب أن يمتثل لل‬ ‫الكهربائية‬...

  • Page 27: Hot Swap Fan Warning

    SC113M Chassis Manual Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent. ‫סילוק המוצר‬ !‫אזהרה‬ .‫חוקי המדינה‬ ‫סילוק סופי של מוצר זה חייב להיות בהתאם להנחיות ו‬ ‫القىانين...
  • Page 28 Chapter 2 Warning Statements for AC Systems Warnung Gefährlich Bewegende Teile. Von den bewegenden Lüfterblätter fern halten. Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger, Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Riesgo de piezas móviles.

  • Page 29: Power Cable And Ac Adapter

    Verbindungskabeln, Stromkabeln und/oder Adapater, die Ihre örtlichen Sicherheitsstandards einhalten. Der Gebrauch von anderen Kabeln und Adapter können Fehlfunktionen oder Feuer verursachen. Die Richtlinien untersagen das Nutzen von UL oder CAS zertifizierten Kabeln (mit UL/CSA gekennzeichnet), an Geräten oder Produkten die nicht mit Supermicro gekennzeichnet sind. 2-18...
  • Page 30 ‫םילבכב שמתשהל רוסיא םייק ,תוחיטבה יקוחו למשחה ירישכמב שומישה יקוחל םאתהב‬ ‫ -ב םיכמסומה‬UL ‫-ב וא‬CSA (‫( לש דוק םהילע עיפומ רשאכ‬UL/CSA ‫ילמשח רצומ לכ רובע‬ ‫ י"ע םאתוה רשא רצומב קר אלא ,רחא‬Supermicro ‫.דבלב‬ ‫تالباكلا ءارشب مق وأ ةددحملا وأ ةرفوتملا تاليصوتلا مادختساب مق ،جتنملا بيكرت دنع‬...
  • Page 31 Het gebruik van niet geschikte Kabels en/of Adapters kan een storing of brand veroorzaken. Wetgeving voor Elektrische apparatuur en Materiaalveiligheid verbied het gebruik van UL of CSA -gecertificeerde Kabels (met UL/CSA in de code) voor elke andere toepassing dan de door Supermicro hiervoor beoogde Producten. 2-20...

  • Page 32: Chapter 3 System Interface

    Chapter 3: System Interface Chapter 3 System Interface Overview There are several LEDs on the control panel as well as others on the drive carriers to keep you constantly informed of the overall status of the system as well as the activity and health of specific components.

  • Page 33: Control Panel Button And Leds

    SC113M Chassis Manual Control Panel Button and LEDs There are two push-buttons located on the front of the chassis. These are (in order from left to right) a reset button and a power on/off button. Reset: The reset button is used to reboot the system. Power: The main power switch is used to apply or remove power from the power supply to the server system.
  • Page 34 Chapter 3: System Interface Information LED Status Description An overheat condition has occurred. Solid red (This may be caused by cable congestion). Fan failure, check for an inoperative fan. Blinking red (1Hz) Power failure, check for a non-operational Blinking red (0.25Hz) power supply.

  • Page 35: Drive Carrier Leds

    SC113M Chassis Manual Drive Carrier LEDs Your chassis uses SAS or SATA, but not both at the same time. SAS/SATA Drives Each SAS/SATA drive carrier has two LEDs. • Green: Each Serial ATA drive carrier has a green LED. When illuminated, this green LED (on the front of the SATA drive carrier) indicates drive activity.

  • Page 36: Chapter 4 Chassis Setup And Maintenance

    Chapter 4 Chassis Setup and Maintenance Chapter 4 Chassis Setup and Maintenance Overview This chapter covers the steps required to install components and perform mainte- nance on the SC113M chassis. The only tool you will need to install components and perform maintenance is a Phillips screwdriver, and under certain circumstances, a hex wrench.

  • Page 37: Removing The Chassis Cover

    SC113M Chassis Manual Removing the Chassis Cover Figure 4-1. Removing the Chassis Cover Removing the Chassis Cover the Chassis Cover 1. Remove the power cord from the rear of the power supply as described in Section 4-2. 2. Slide the cover toward the rear of the chassis. 3.

  • Page 38: Installing Hard Drives

    The SC113M chassis supports eight hot-swappable 2.5" hard drives mounted in drive carriers which can be removed from the chassis without powering down the system. Only enterprise level hard drives are recommended for use in Supermicro chassis. Removing Hard Drive Trays from the Chassis 1.
  • Page 39 SC113M Chassis Manual Figure 4-3. Removing the Dummy Drive From the Carrier Installing a Hard Drive into a Carrier 1. Remove the four screws securing the dummy drive to the hard drive carrier and set them aside for later use. 2.

  • Page 40: Installing The Motherboard

    Chapter 4 Chassis Setup and Maintenance Installing the Motherboard Chassis Standoffs Figure 4-4. Chassis Standoffs Permanent and Optional Standoffs Standoffs prevent short circuits by creating space between the motherboard and the chassis floor. The SC113M chassis includes permanent standoffs in locations used by most motherboards.

  • Page 41: Installing The Motherboard

    SC113M Chassis Manual Figure 4-5. Installing the Motherboard Installing the Motherboard Installing the Motherboard 1. Review the documentation that came with your motherboard. Become familiar with component placement, requirements, precautions, and cable connec- tions. 2. Power down the system and remove the power cord from the rear of the power supply as described in Section 4-2.

  • Page 42: Expansion Card Setup

    Riser cards are sold separately. Note: Chassis models SC113MFAC2-605CB and SC113M-606CB require a short length riser card bracket. This bracket is part number MCP-120-00078-0N. See the following section of this manual for details on installing full-length and short-length riser card brackets.
  • Page 43 SC113M Chassis Manual Riser Card Riser Card Bracket Screw Figure 4-7. Installing an Expansion Card with a Full-Length Bracket Installing an Expansion Card with a Short or Full-Length Bracket 1. Confirm that you have the correct riser card for your chassis model and that the expansion card includes a standard mounting bracket.

  • Page 44: Removing The Backplane

    Chapter 4 Chassis Setup and Maintenance Removing the Backplane The SC113M chassis backplane is located behind the hard drives and in front of the front system fans. In order to change the jumper settings on the backplane, it may be necessary to remove the backplane from the chassis. Removing the Backplane from the Chassis 1.

  • Page 45: Backplane Installation

    SC113M Chassis Manual Backplane Installation Installing the Backplane 1. Slide the backplane into the chassis as shown, inserting the lower edge of the backplane into the clips on the floor of the chassis. 2. Align the mounting holes in the backplane with the mounting holes in the chassis 3.

  • Page 46: Installing The Air Shroud

    Chapter 4 Chassis Setup and Maintenance Installing the Air Shroud Figure 4-11. Air Shroud Installation Air shrouds concentrate airflow to maximize fan efficiency. The SC113M chassis air shroud does not require screws to set up. Installing the Air Shroud 1. Power down the system and remove the power cord from the rear of the power supply.

  • Page 47: Checking The Airflow

    SC113M Chassis Manual Checking the Airflow Checking the Server's Airflow 1. Make sure there are no objects to obstruct airflow in and out of the server. In addition, if you are using a front bezel, make sure the bezel's filter is replaced periodically.

  • Page 48: Completing The Installation

    Chapter 4 Chassis Setup and Maintenance Completing the Installation In most cases, the chassis power supply and fans are pre-installed. If you need to install fans, continue to the System Fans section of this chapter. If the chassis will be installed into a rack, continue to the next chapter for rack installation instructions. 4-13...

  • Page 49: 4-10 System Fans

    SC113M Chassis Manual 4-10 System Fans The SC113M chassis includes four heavy-duty fans, with open slots for two addi- tional fans, to provide cooling for the chassis. These fans circulate air through the chassis and lower the internal temperature within the chassis. Figure 4-12.
  • Page 50 Chapter 4 Chassis Setup and Maintenance Figure 4-13. Installing the Fan Tray into the Chassis The SC113M chassis includes four pre-installed fans. Two additional open slots are available so that up to two more fans may be added. Replacing a System Fan 1.

  • Page 51: 4-11 Power Supply

    SC113M Chassis Manual 4-11 Power Supply The SC113M chassis has either a fixed 330, 560 or 600 Watt power supply or a redundant 400 or 600 Watt power supply. These power supplies are auto-switching capable, enabling it to automatically sense and operate at a 100v to 240v input voltage.

  • Page 52: Replacing A Redundant Power Supply

    Chapter 4 Chassis Setup and Maintenance Release Tabs Figure 4-15. Removing a Redundant Power Supply Replacing a Redundant Power Supply Your SC113MFAC2-R606CB and SC113MTQ-R400CB chassis include a redundant power supply (two power modules). You can leave the server running and remove only one power supply at a time.
  • Page 53 SC113M Chassis Manual Notes 4-18...

  • Page 54: Chapter 5 Rack Installation

    Chapter 5: Rack Installation Chapter 5 Rack Installation Overview This chapter provides a quick setup checklist to get your chassis up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. Unpacking the System You should inspect the box the chassis was shipped in and note if it was damaged in any way.

  • Page 55: Rack Precautions

    SC113M Chassis Manual Warnings and Precautions! Rack Precautions • Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with the full weight of the rack resting on them. • In single rack installation, stabilizers should be attached to the rack. •...

  • Page 56: Rack Mounting Considerations

    Chapter 5: Rack Installation Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environment compatible with the manufacturer’s maximum rated ambient tempera- ture (TMRA).

  • Page 57: Identifying The Sections Of The Rack Rails

    SC113M Chassis Manual Rack Mounting Instructions This section provides information on installing the SC113M chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the instal- lation instructions that came with the rack unit you are using.

  • Page 58: Outer Rails

    Chapter 5: Rack Installation Secure to the Front of the Rack Secure to the Rear of the Rack Attach Outer Racks Together Figure 5-2. Assembling the Outer Rails Outer Rails Outer rails attach to the server rack and hold the server in place. The outer rails for the SC113M chassis extend between 30 inches and 33 inches.
  • Page 59 SC113M Chassis Manual Figure 5-3. Installing into a Rack Installing the Chassis into a Rack 1. Confirm that chassis includes the inner rails and rail extensions (B). Also, confirm that the outer rails are installed on the rack. 2. Line chassis rails with the front of the rack rails. 3.
  • Page 60 Chapter 5: Rack Installation Figure 5-4. Installing into an Open Rack Installing the Chassis into a Rack in Mid-Mount Position 1. If necessary, remove the chassis rails and the chassis ears, if the ears are installed at the front of the chassis. 2.
  • Page 61 SC113M Chassis Manual Notes...

  • Page 62: Appendix A Sc113M Chassis Cables

    Appendix A Chassis Cables Appendix A SC113M Chassis Cables A-1 Overview This appendix lists supported cables for your chassis system. It only includes the most commonly used components and configurations. For more compatible cables, A-2 Cables Included with SC113M Chassis (SAS/SATA) SC113M Part # Type...
  • Page 63 SC113M Chassis Manual A-3 Compatible Cables These cables are compatible with the SC113M Chassis. This section lists cables included with the SC113M Chassis packages. Alternate SAS/SATA Cables Some compatible motherboards have different connectors. If your motherboard has only one SAS connector that the SAS/SATA cables must share, use one of the following cables.
  • Page 64 Appendix A Chassis Cables Extending Power Cables Although Super Micro chassis are designed with to be efficient and cost-effective, some compatible motherboards have power connectors located in different areas. To use these motherboards you may have to extend the power cables to the mother boards.
  • Page 65 SC113M Chassis Manual Notes...

  • Page 66: Appendix Bsc113M Power Supply Specifications

    Power and 100-240 Vac Input AC Input 50-60Hz Frequency +5V standby Max: 3 Amp/Min: 0A +12V Max: 50A / Min: 0.5A (100Vac - 240Vac) SC113MTQ-600CB, SC113MFAC2-605CB 600W MFR Part # PWS-605P-1H Total Output Power and 100-240 V Input AC Input...
  • Page 67 SC113M Chassis Manual SC113MTQ-563CB 560W MFR Part # PWS-563-1H AC Voltage 100-240 V, 50-60 Hz, 7.5 Amp max +5V 15 Amp +5V standby 2 Amp +12V 46.5 Amp -12V 0.5 Amp +3.3V 15 Amp SC113MTQ-400CB 400W MFR Part # PWS-406P-1R 400W: 100-240 V AC Input 50-60 Hz...

  • Page 68: Appendix C Bpn-Sas-113Tq Backplane Specifications

    Appendix C BPN-SAS-113TQ Backplane Specifications Appendix C BPN-SAS-113TQ Backplane Specifications To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. C-1 ESD Safety Guidelines Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam- age to your system, it is important to handle it very carefully.
  • Page 69 This manual reflects BPN-SAS-113TQ Revision 1.02, the most current release avail- able at the time of publication. Always refer to the Supermicro website at www.su- for the latest updates, compatible parts and supported configurations.
  • Page 70 Appendix C BPN-SAS-113TQ Backplane Specifications Connectors, Jumpers and LEDs C-5 Rear Connectors The following connectors are on the side of the backplane that faces the rear of the chassis. They are marked by silkscreen labels. +12V +12V 9072 RST UPGRADE J P46 M H3 M H4...
  • Page 71 SC113M Chassis Manual C-6 Rear Connector and Pin Definitions #1. Backplane Main Power Connectors Backplane Main Power The 4-pin connectors designated JP10, provide 4-Pin Connector power to the backplane. See the table on the Pin# Definition right for pin definitions. +12V 2 and 3 Ground...
  • Page 72 Appendix C BPN-SAS-113TQ Backplane Specifications #6 and #7. I C Connectors C Connector Pin Definitions The I C Connectors, designated JP44 and Pin# Definition JP45, are used to monitor HDD activity and Data status. See the table on the right for pin Ground definitions.
  • Page 73 SC113M Chassis Manual C-7 Rear Jumper Locations and Pin Definitions JP29 JP33 JP18 +12V +12V 9072 RST UPGRADE J P46 M H3 M H4 M H2 J P52 SB#2 SB#1 J P33: M ODE SEL J P29 1- 2: SGPI O J P13 2- 3: I 2C I 2C#2...
  • Page 74 Appendix C BPN-SAS-113TQ Backplane Specifications C and SGPIO Modes and Jumper Settings This backplane can utilize I C or SGPIO. SGPIO is the default mode and can be used without making changes to your jumpers. The following information details which jumpers must be configured to use I C mode or restore your backplane to SGPIO mode.
  • Page 75 SC113M Chassis Manual C-8 Front Connectors and LED Indicators SAS #1 SAS #5 SAS #3 ACT#3 FAIL#1 ACT#0 C106 ACT#6 ACT#2 FAIL#0 FAIL#2 FAIL#6 SAS #4 SAS #6 SAS #2 SAS #0 SAS #7 Figure C-4. Front Connectors Rear SAS/SATA Connectors Rear Connector SAS/SATA Drive...

  • Page 76: Appendix D Bpn-Sas3-113A-N2 Backplane Specifications

    Appendix D BPN-SAS3-113A-N2 Appendix D BPN-SAS3-113A-N2 Backplane Specifications This chapter offers guidelines for personal and equipment safety, and notes about the BPN-SAS3-113A-N2 version documented in this manual. D-1 ESD Safety Guidelines Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent damage to your system, it is important to handle it very carefully.
  • Page 77 This manual reflects BPN-SAS3-113A-N2, Revision 1.10, the most current release available at the time of publication. Refer to the Supermicro website at www.supermicro.com for the latest updates, compatible parts and supported configurations.
  • Page 78 Appendix D BPN-SAS3-113A-N2 D-4 Rear Connector Locations The following connectors are on the side of the backplane that faces the rear of the chassis. They are marked by silkscreen labels. JPW2 BMC_SMB BPN-SAS3-113A-N2 UB12 REV 1.10 DESIGNED IN USA JSM2 JPW1 JSM1 PRESS FIT...
  • Page 79 SC113M Chassis Manual D-5 Rear Connector Definitions 1. Backplane Main Power Connectors Main Power 4-Pin Connector The 4-pin connectors, designated JPW1 Pin# Definition and JPW2, provide power to the backplane. See the table on the right for pin definitions. +12V 2 and 3 Ground 2.
  • Page 80 Appendix D BPN-SAS3-113A-N2 D-6 Rear Jumpers JPW2 BMC_SMB BPN-SAS3-113A-N2 UB12 REV 1.10 DESIGNED IN USA JPW1 JSM1 JSM2 PRESS FIT PRESS FIT TP23 PRESS FIT PRESS FIT BTTN1 JTAG BTTN2 CPLD_RST CPU_SEL JSM4 JSM3 BAR CODE R438 1 2 3 Figure D-2.
  • Page 81 SC113M Chassis Manual D-7 Front Connectors and LED Indicators Connectors for SAS drive numbers #0 through #7 are SAS3. SAS #8 and #9 are hybrid ports that support SAS2 or NVMe. LED12 LED16 LED14 LED2 LED6 LED4 LED18 LED17 SAS#1 SAS#5 SAS#3 SAS#7/...
  • Page 82 Appendix D BPN-SAS3-113A-N2 Notes...
  • Page 83 SC113M Chassis Manual Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage.

This manual is also suitable for:

Sc113m seriesSc113mtq-600cbSc113mtq-r400cbSc113mtq-563cbSc113mtq-330cbSc113mfac2-r606cb

Table of Contents