Table of Contents
Advertisement
SC116 Chassis Manual
Bracket
Riser
Card
1
4
Installing an Expansion Card
1. Power down the system and remove the power cords from the rear of the
power supplies. Remove the chassis cover as described in Section 5-3.
2. Confirm that you have the correct riser card for your chassis model and that
the expansion card includes a standard bracket.
3. Remove the chassis cover.
4. Install the riser card onto the bracket.
5. Insert the card and bracket into the appropriate slot on the motherboard.
6.
Secure the bracket to the chassis using screws as illustrated.
7. Choose the PCI card slot in which to place the expansion card.
8. In that slot, open the slot cover lever and slide the slot cover sideways.
9. From inside the chassis, remove the slot cover.
10. Slide the expansionon card into the riser card and attach the expansion card
bracket in place of the slot cover.
11. Secure the expanion card by closing the PCI slot lever.
12. Connect cables to the expansion card if necessary.
Figure 5-10. Installing an Expansion Card
Secure the Bracket to the
Chassis
5-10
1
6
install add-on card
Advertisement
Table of Contents
