Digital Audio Using The Hdmi 1/Arc Jack - Insignia Roku TV NS-48DR420NA16 User Manual

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16

Digital audio using the HDMI 1/ARC jack

Your TV can send sound to an ARC device, like an AV receiver, to create a home theater that uses two or more speakers.
When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or
sound bar.
On your TV
HDMI® cable
connector
HDMI®1 (ARC)
jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect an HDMI® cable (not provided) to the HDMI1 (ARC) jack on the side of your TV and to the HDMI IN jack on
the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 To turn off your TV speakers, on the Home menu, press
Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers
enabled check box.
6 To configure the HDMI1 (ARC) jack to output sound to an ARC device, on the Home menu, press
Settings, then press OK. Highlight System, then press OK. Highlight Control other devices (CEC), then press OK.
Highlight HDMI ARC, then press OK to check the box.
ARC audio device
Sound bar
HDMI® cable
www.insigniaproducts.com
Side of TV
or to highlight Settings, then press OK. Highlight
or to highlight
29