Insignia Roku TV NS-48DR420NA16 User Manual page 50

NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16
7 When the channel scans finish, your TV shows the number of channels it added.
Scanning for channels can take several minutes.
Tip
Repeat the channel scan from time to time to make sure you are receiving all of the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Note
You'll have to repeat the channel scan if you remove the Antenna TV tile from the
Home screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings >TV inputs >Antenna TV > Scan again for channels. Your antenna
reception and picture quality depend on the position of your antenna and on your
location relative to the antennas of broadcasters in your area.
Now, you're ready to watch broadcast TV! While you're watching, try the following:
• Press the UP and DOWN arrows to change channels.
• Press the RIGHT arrow to display the channel list and then use the UP and DOWN arrows to select a channel to watch.
Or press REWIND or FAST FORWARD to jump through the channel list a page at a time.
• Press OK to display information about the current program.
• Press to switch to the previously tuned channel.
• Press to see options for picture and sound settings.
Note
If
Jump Back button on a universal remote. For more information, see
page 72.
Remote control
buttons while watching TV.
is not available on your remote control, you can use
on page 14 has more information on using the remote control
www.insigniaproducts.com
on the Roku App or the
Other devices on
45