Changing The Parental Control Pin; Resetting Parental Controls; More Settings; Changing Network Settings - Insignia Roku TV NS-48DR420NA16 User Manual

To watch the blocked program, you need to know the PIN code defined when you enabled parental controls, as
explained in Creating a parental control PIN
1 Press OK to select Unblock and display a PIN pad.
2 Use the arrow buttons to enter your parental control PIN code, and then press OK to select Unblock everything.
After unblocking shows that have been blocked, all blocking is disabled for two hours or until you turn off your TV.

Changing the parental control PIN

To change your parental control PIN:
1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN.
2 In the Parental controls screen, highlight Change PIN.
3 Move the highlight into the adjacent keypad, and then use the arrow buttons and the OK button to enter a four digit
code. Then repeat the process to enter the same PIN again, just to make sure you correctly entered the PIN you want
to use.

Resetting parental controls

So now your kids have grown up and gone away to college, and you no longer want to deal with blocked programs.
To erase all parental control settings:
1 From the Home screen menu, navigate to Settings >Parental controls, and then enter your parental control PIN.
2 In the Parental controls screen, highlight Reset parental controls.
3 Follow the instructions on the screen to confirm that you want to erase all parental control settings.
Tip
Resetting parental controls also erases your parental control PIN.

More settings

This section describes the features and settings of your TV that were not covered in the other parts of this guide.

Changing network settings

If needed, you can change your network settings at any time. For example, if you change the name of your wireless
network (its SSID) or its password, you will need to change your TV's settings so that it can continue to connect. Also, if
you decided not to connect to the Internet in
later time.
To change network settings, from the Home screen menu, navigate to Settings > Network, and then press the RIGHT
arrow. At this point, you can choose the following options:
• Update connection—Press OK to start the update process. Your TV uses your current wireless network name and
password to reconfirm the wireless connection, the local network connection, and the Internet connection.
• Set up new Wi-Fi connection—Press OK to start a scan for wireless networks. Follow the on-screen instructions to
complete the network connection. For help with setting up a new connection, see "Setting up your TV"on page 34. In
addition to your own wireless signal, your TV might pick up signals from your neighbors. Now you can do one of the
following:
• Select your network name—Select the name of your network and then enter your wireless password if
requested.
66
on page 62.
Guided Setup on page 33, you can use Network settings to connect at a
www.insigniaproducts.com
40"/48" 1080p, 60Hz, LED Insignia Roku TV