Connecting external speakers or a sound bar
When you connect external speakers or a sound bar, sound plays through your TV speakers and the external speakers or
sound bar.
You can connect external speakers or a sound bar using the:
• Digital optical audio jack
• ARC jack
Digital optical audio jack
24" or 32" model
Note
If your TV is the 48" model, go to
Note
Images do not necessarily represent the exact design of your television.
On your TV
Digital optical
audio cable
connector
Digital optical
audio jack
1 Make sure that your TV's power cord is unplugged and the digital speaker system or sound bar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on the side of your TV
and to the digital optical AUDIO IN jack on the digital speaker system or sound bar.
3 Plug your TV's power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or sound bar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or sound bar.
5 To turn off your TV speakers, on the Home menu, press
Audio, then press OK. Highlight TV speakers, then press OK. Press OK to remove the check from the TV speakers
enabled check box.
48" model
Digital speaker
system
Sound bar
Digital optical audio cable
www.insigniaproducts.com
24"/32" 720p, 48" 1080p, 60Hz, LED Roku TV
on page 50.
Side of TV
or
to highlight Settings, then press OK. Highlight
49