NS-40DR420NA16/NS-40DR420CA16/NS-48DR420NA16/NS-48DR420CA16
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect your cable or satellite box using:
• HDMI® (best)
• AV (composite video) (good)
• Coaxial (good)
HDMI® (best)
On your TV
HDMI® cable
connector
HDMI® jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI® cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the
cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press
Note
An HDMI® cable carries both audio and video. You do not need to use any
audio cables.
Cable or
satellite box
HDMI® cable
or
to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
www.insigniaproducts.com
What connection should I use?
Side of TV
on page 16.
Cable
wall jack
17