Table of Contents
Advertisement
5.
When the desired option appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (White follower mode).
6.
To quit the <<SETUP MODE>>, turn off the
power.
Interface board slot
This function activates one interface board while 2 interface boards are mounting.
NOTE
You cannot use this function when the setup mode is brought by pressing
status.
LCD display
Interface Board Slot
The following is an example of operation when you use this function.
1.
In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2.
Press
repeatedly until "Interface Board
Slot" appears in the lower line of the menu
screen.
6-46
Options
AUTO, SLOT1, SLOT2 (Default: AUTO)
<<SETUP MODE>>
White follower mode
MENU
Remarks
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Interface Board Slot
in the Ready
Advertisement
Table of Contents
