Fujitsu i-4990C Operator's Manual page 84

The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press repeatedly until "TP_IF Baud
Rate" appears in the lower line of the menu
screen.
3. Press
ENTER
The option select screen appears with the
current setting 9600 blinking (blinking indi-
cates "changeable").
4. Press or
The displayed option changes (19200, 2400,
4800 ).
5. When the desired option appears, press
to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (TP_IF Baud Rate).
6. To quit the <<SETUP MODE>>, turn off the
power.
6-32
.
.
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
TP_IF Baud Rate
TP_IF Baud Rate
9600
TP_IF Baud Rate
19200
<<SETUP MODE>>
TP_IF Baud Rate