Fujitsu i-4990C Operator's Manual page 105

7. Press .
ENTER
The PAPER SIZE screen appears with the
current setting A4P blinking (blinking indicates
"changeable").
8. Press or
The displayed parameter changes (LTP, B5P,
A5P, A4L, etc.).
9. When the desired parameter appears, press
to save the change.
ENTER
The parameter set screen appears with the new
parameter blinking.
10. Press
CANCEL
The scanning parameters screen appears with
the new parameter replaced and with SETUP
blinking (blinking indicates "selectable").
11. Press .
START blinks (blinking indicates "selectable").
12. Press .
ENTER
The scanner feeds and scans documents
continuously until it detects an error (usually
"Hopper empty"). During feeding, the upper line
indicates "Feeding!!" and the lower line indicates
the number of sheets fed.
• To halt the test, press
• To restart the test, press
• To restart from a hopper empty status, put
sheets of paper on the hopper table and press
.
CANCEL
• To quit the offline feed test, press
the halted state.
13. To quit the <<TEST MODE>>, turn off the power.
.
.
CANCEL
.
ENTER
CANCEL
S LTP
S LTP
START
S A4P
START
12345678
in
PAPER SIZE
A4P
PAPER SIZE
LTP
200 LA
LA
200 LA
SETUP
200 LA
SETUP
Feeding!!
1234
6-53