Fujitsu i-4990C Operator's Manual page 65

IPC-3 mode
This function selects a pattern to be set in the IPC-3 image processing feature.
LCD display
IPC-3 Mode
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press four times.
The <<SETUP MODE>> menu screen (IPC-3
Mode) appears.
3. Press .
ENTER
The option select screen appears with the
current setting 0 blinking (blinking indicates
"changeable").
4. Press or
The displayed option changes (1, 2, 3, 4, 5).
5. When the desired pattern number appears,
press to save the change.
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (IPC-3 Mode).
Options
0, 1, 2, 3, 4, 5 (Default : 0)
.
Remarks
0: do not select any pattern
1 to 5: select pattern numbers 1 to 5
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
IPC-3 Mode
IPC-3 Mode
0
IPC-3 Mode
5
<<SETUP MODE>>
IPC-3 Mode
6-13