Table of Contents
Advertisement
Allocatable setup functions and other special functions
Setup functions noted above
START key
EJECT key
(Default: Undefined)
The
,
,or
F1
F2
the allocated setup function just by pressing the button whenever the scanner is in the Ready state.
This function is valid even in the setup mode lock state (refer to the next function). However, the
,
, and
F1
F2
The following is an example of operation when you allocate START and EJECT keys to the
and
buttons respectively.
F2
1.
In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2.
Press
repeatedly until "Function Key"
appears in the lower line of the menu screen.
3.
Press
.
ENTER
The function key select screen appears with
F1 blinking (blinking indicates "selectable").
4.
Press
.
ENTER
The F1 selection screen appears with the
current setting Undefined blinking (blinking
indicates "changeable").
5.
Press
or
The setup functions, START key, and EJECT
key are displayed in sequence at the lower
line.
button can be used as a shortcut key which enables you to access
F3
buttons are invalid in setup, browse, and test modes.
F3
.
Remarks
START:
starts the operation stopped by
EJECT and sends data to the host
computer.
EJECT: stops operation and ejects the paper in the
transport unit.
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Function Key
Function Key
F1
F2
F1 selection
Undefined
F1 selection
START key
F1
F3
6-41
Advertisement
Table of Contents
