Fujitsu i-4990C Operator's Manual page 76

Consumable counter reset
This function is to be used when the consumable parts are replaced before the accumulated value of
the consumable conter reaches to the setting value.
NOTE
You cannot use this function when the setup mode is brought by pressing "MENU" in the Ready
status.
LCD display
Consumable Counter
Reset
The following is an example of operation when you change the setting.
1. <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press repeatedly until "Consumable
Counter Reset" appears in the lower line of
the menu screen.
3. Press
ENTER
The current option list screen appears with
NO blinking. (blinking indicates "changeable").
4. Press or
The displayed option changes (YES blinks).
6-24
Options
YES, NO (Default)
.
.
Remarks
YES: Reset the accumulated
consumable counter value.
NO: cancel the resetting of
consumable counter value.
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Consumable Counter Reset
Reest Counter Value
NO
Reest Counter Value
YES
00250000
00250000