Fujitsu i-4990C Operator's Manual page 70

Set "braking power" according to the table below.
Setting Braking power
Thick Very strong
Medium Strong
Thick
Normal Medium
(factory default)
Medium Light
Thin
Thin Very light
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen (Paper
Length Check) appears.
2. Press repeatedly until "Paper Separation
Level" appears in the lower line of the menu
screen.
3. Press
ENTER
The option select screen appears with the
current option Normal blinking (blinking
indicates "changeable").
4. Press or
The displayed option changes (Thick to Thin).
6-18
"Double feed" frequently occurs. "Mis-pick" or "SF2 ···" frequently occurs.
Make the braking
power stronger.
.
.
Make the braking
power weaker.
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Paper Separation Level
Paper Separation Level
Normal
Paper Separation Level
Medium Thin