Technical Data - SAB JOLLY Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

Check the efficiency of the machine's main drain. Then proceed with the connection of the water drain hose
to the machine. Check again pouring an adequate quantity of water directly into machine's drain tray
(located under the drip tray).
Handle the machine with care.
Do not leave such packing items as plastic bags, styrofoam, nails, etc. around because children or other
people could get hurt or damaged.
In case of substitution of the water inlet hose, the used one is not to be reused.

Technical data

Voltage
Wattage
Temperature
Water
Water pressure from the mains
Hydraulic connections
Machine ventilation
Boiler capacity
Manuale Utente – User manual – Macchina caffè modello JOLLY PRESTIGE
Please refer to the technical data plate on the machine
Please refer to the technical data plate on the machine
The machine should not be operated with temperatures under
and over 36 °C.
The machine has to be used with fresh, soft, clean drinking water.
The water hardness being between:
50 to 100 American degrees
7 to 14 German degrees
4 to 8 French degrees
Please install a water filter if necessary.
Maximum water inlet pressure is 6 Bar (0,6 MPa – 600 KPa)
Please install a pressure reducing valve if water pressure from the
mains is higher.
The minimum water pressure is 1.5 Bar (0.15MPa-1500 KPa)
Water inlet 3/8" gas
Please make sure that there is an open area of at least
each side and behind the machine to allow adequate ventilation
5,0 litres
6,0 litres
13,5 litres
20,5 litres
Rev. 2018-04 – Pag 24 di 37
Con riserva di modifica - Specification subject to change
1 group
2 group COMPATTA
2 group
3 group
6°C
100 mm on

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Prestige

Table of Contents