Technical Data - SAB JOLLY PRESTIGE 1GR User Manual

SV JOLLY.pdf 1 17/10/2014

Technical data

Voltage
Wattage
Temperature
Water
Water pressure from the mains Maximum water inlet pressure is 6 Bar (0,6 MPa – 600 KPa).
Hydraulic connections
Machine ventilation
Boiler capacity
Dimensions
Version
1 group
2 group Compact
2 group
3 group
4:46 pm
Please refer to the technical data plate on the machine
Please refer to the technical data plate on the machine
The machine should not be operated with temperatures under
6°C and over 36 °C.
The machine has to be used with fresh, soft, clean drinking water.
The water hardness being between:
50 to 100 American degrees
7 to 14 German degrees
4 to 8 French degrees
Please install a water fi lter if necessary.
Please install a pressure reducing valve if water pressure from
the mains is higher.
The minimum water pressure is 1.5 Bar (0.15MPa-150 KPa).
Water inlet 3/8" gas.
Please make sure that there is an open area of at least 100
mm on each side and behind the machine to allow adequate
ventilation.
6.3 litres 1 group
6.5 litres 2 group Compact
12 litres 2 group
18 litres 3 group
Width mm
370
560
665
905
User Manual - Jolly Prestige
2014 – Page 6
Specifications subject to change without notice
Depth mm Heighth mm
535
535
535
535
521
521
521
521