Technical Data - SAB ELLIPSE 2GR User Manual

Technical data

Voltage
Wattage
Temperature
Water
Water pressure from the mains
Hydraulic connections
Machine ventilation
Boiler capacity
Manuale Utente – User manual – Gebrauchsanleitung - Macchina caffè modello ELLIPSE
Con riserva di modifica - Specification subject to change – Änderung vorbehalten
Please refer to the technical data plate on the machine
Please refer to the technical data plate on the machine
The machine should not be operated with temperatures under 6°C
and over 36 °C.
The machine has to be used with fresh, soft, clean drinking water.
The water hardness being between:
50 to 100 American degrees
7 to 14 German degrees
4 to 8 French degrees
Please install a water filter if necessary.
Maximum water inlet pressure is 6 Bar (0,6 MPa – 600 KPa)
Please install a pressure reducing valve if water pressure from the
mains is higher.
The minimum water pressure is 1.5 Bar (0.15MPa-1500 KPa)
Water inlet 3/8" gas
Please make sure that there is an open area of at least 100 mm on
each side and behind the machine to allow adequate ventilation
14 litres 2 group
18 litres 3 group
ed 2011 – Pag. 20 di 41