Installing The Cf Card - Canon PowerShot G6 User Manual

Installing the CF Card

Install the CF card (supplied) into the camera as follows.
3
1
Check that the power is off (p. 29) and slide the CF
card slot cover in the direction of the arrow.
2
Insert the CF card as shown in the illustration.
Push the card in until the CF card eject button fully extends. To
remove the CF card, push the CF card eject button and pull the
card out.
3
Slide the CF card slot cover closed.
When the indicator next to the viewfinder blinks green, the
camera is writing, reading, erasing or transmitting an image to or
from the card. Do not perform the following, or image data may
be lost or corrupted:
• Do not shake the camera.
• Do not turn off the power or open the battery cover or CF card
slot cover.
You are recommended to use CF cards that have been
formatted in your camera (p. 141). The card supplied with the
camera may be used without further formatting.
Label
1
2
CF card eject button
23