Adjusting The Play Time And Repeat Settings - Canon PowerShot G6 User Manual

Index Playback
Press the
playback (3 images).
Select an image using the main dial or
the or
and mark or remove marks from images
using the
selector.
The selection number and a check mark
appears at the bottom of selected
images.
After you press the SET button, you can
select all the images by selecting [Mark
all] using
and pressing the SET button again. (You
can deselect all the images by selecting
[Clear all].)
You can select images using the main
dial or the
selector and change the settings using
the or
after [Mark all] or [Clear all] has been
selected.
5
Press the MENU button.
The image selection screen will close.

Adjusting the Play Time and Repeat Settings

You can change the play time for all the images in a show and have
the show repeat itself continuously.
Sets the duration that each image in a slide show is displayed.
Play Time The options are any one of 3 – 10 seconds, 15 seconds, 30
seconds and Manual.
Sets whether the slide show stops when all the slides have
Repeat
been displayed or continues to display until stopped.
1
Display the slide show menu.
button to switch to index
arrow on the omni selector
or arrow on the omni
or on the omni selector
or arrow on the omni
arrow on the omni selector
137