List Of Messages - Canon PowerShot G6 User Manual

List of Messages

The following messages may appear on the LCD monitor.
For messages which may appear when a printer is connected,
refer to the Direct Print User Guide.
Busy... :
No memory card:
Cannot record!:
Memory card error!:
Memory card full:
Naming error!:
Change the battery
pack:
No image:
Image too large:
Incompatible JPEG
format:
Corrupted data:
RAW:
Cannot magnify!:
168
Image is being recorded to, or read from, CF card.
Resetting settings to default.
You turned on the power without a CF card installed.
You attempted to shoot an image without a CF card
installed.
CF card has experienced an anomaly.
CF card is too full to accommodate more images,
image settings (such as slide show or print settings)
or sound memos.
The file could not be created because there is a file
with the same name as the directory that the camera
is attempting to create, or the highest possible file
number has already been reached. In the Set up
menu, please set [File No. Reset] to [On]. After you
save all the images you wish to retain onto a
computer, format the CF card (p. 141). Please note
that formatting will erase all the existing images and
other data.
Battery charge is insufficient to operate the camera.
Replace it immediately with a charged battery pack or
recharge it.
No images recorded on CF card.
You attempted to play back an image larger than
4064 x 3048 pixels.
You attempted to play back an incompatible JPEG
file.
You attempted to play back an image with corrupted
data.
You attempted to play back an image recorded in an
incompatible RAW format.
You attempted to magnify a movie or an image that
was photographed with another camera, recorded in
a different format, or edited on a computer.