Canon PowerShot G6 User Manual page 117

3
Press the
selector, then select the number
of shots using the
on the omni selector.
If you press the
omni selector continuously, the number
of shots increases in units of 5 shots at a
time.
The maximum number of shots* is determined according to the CF
card's remaining capacity.
* In some cases, the actual maximum number of shots may be fewer than
the displayed number.
4
Press the SET button
appears on the LCD monitor and
panel.
5
Press the shutter button.
The first image is shot and the interval shooting session starts.
Once the set number of shots is taken, the camera automatically
powers down regardless of the power saving function settings.
If the below operations are accessed while the interval shooting is
in process, the interval shooting session will be canceled.
• Turning the mode dial or pressing the shutter button halfway
while the camera is waiting to shoot the next image
• Opening the CF card slot cover or battery cover
• Switching to Playback mode
• Turning off the power
Once the interval shooting session is started, all operation
buttons become inactive.
The lens stays extended until the next image is shot.
Images are not displayed on the LCD monitor right after being
shot.
Interval shooting is not available when the date and time are not
set.
Continuous Shooting, AEB mode and Focus-BKT mode are not
available. The self-timer can only be used for the first shot in the
series.
arrow on the omni
or arrow
or arrow on the
appears on the display
113