Changing the Photo Effect (continued)
When
is selected
A screen allowing you to set the contrast,
sharpness and color saturation appears
when you press the SET button.
In this screen, select the item you wish to
set using the
selector and set it using the
on the omni selector, then press the SET
button.
Contrast
This function allows you to adjust the degree of brightness.
Select from – (Weak), 0 (Neutral) and + (Strong).
Sharpness
This function allows you to adjust how sharply outlines are defined.
Select from – (Weak), 0 (Neutral) and + (Strong).
Saturation
This function allows you to adjust the color depth.
Select from – (Low), 0 (Neutral) and + (High).
You can shoot the image right after selecting settings by pressing the
shutter button. The menu displays again after the shot, allowing you
to change the settings easily.
4
Press the FUNC. button or click the main dial.
The white balance cannot be set when
mode is selected.
100
or
arrow on the omni
or
arrow
(Sepia) or
(B/W)