See page 206 for settings that can be changed in this mode.
If a correct exposure cannot be obtained, the shutter speed and
aperture value show in red on the LCD monitor. Use the
following methods to obtain the correct exposure and make them
show in white.
• Use the flash.
• Change the light metering mode.
• Change the ISO speed setting.
Differences between the P and
The following settings can be adjusted in P mode, but not in
mode.
• Exposure Compensation
• Bracket Mode
• AE Lock
• Built-In Flash (Flash on, Slow
Synchro, 2nd-curtain flash)
• Continuous Shooting
• Manual Focus
• Super Macro Mode
• White Balance
Modes
• Flash Exposure Compensation
• FE Lock
• File Format Settings
• AF frame selection
• ISO Speed
• Photo Effect
• ND Filter
• Light Metering Mode
• Intervalometer
81