Installing A Cf Card - Canon PowerShot A10 User Manual

Battery Performance
Number of Shots
LCD Monitor ON LCD Monitor OFF
AA Alkaline
Batteries
Approx.
(included with
200 shots
the camera)
AA NiMH Approx.
Battery NB-1AH
350 shots
* The actual performance may vary from the above data
according to the shooting conditions and the selected
recording mode.
<Test Conditions>
Shooting: Room temperature (23 °C, 73 °F),
alternating between wide angle and
telephoto every 20 seconds, flash used
one in four shots, power turned off and
on again after every eighth shot.
Room temperature (23 °C, 73 °F),
Replay:
continuous replay at 3 seconds per
image.
20
Replay
Time
Approx. Approx.
500 shots 240 min.
Approx. Approx.
1000 shots 240 min.
Battery Status Indications
The LCD monitor displays an icon or
message to let you know when batteries
are low or depleted.
Batteries are beginning to run low.
Replace (or recharge) batteries
promptly.
If the LCD monitor is off, this icon
will appear when you press any of
the following buttons:
/ .
Batteries are fully depleted and the
Change
camera can no longer operate. You
the
should replace the batteries
batteries
immediately.

Installing a CF Card

1
Be sure that the camera is
turned off.
, / , or