Turning the Power Off
1
Power Saving Function
This camera is equipped with a power saving function. When this
function is turned on and it activates, restore power by turning the
mode lever toward
Shooting Mode: Powers down approximately 3 minutes after the
last control is accessed on the camera.
The LCD monitor also shuts off approximately 1 minute
last control is accessed on the camera. Press any button except the
mode lever to turn the LCD monitor back on.
* This time can be changed (p. 52).
Playback Mode: Powers down approximately 5 minutes after the
last control is accessed on the camera.
Printer Connection Mode: Powers down approximately 5 minutes
after the last control is accessed on the camera.
Please note that the camera continues to consume a minimal
amount of power even when the power saving function shuts it
down.
The power saving function is disabled while a slide show plays on
the camera or during a computer connection (p. 135, 151).
You can turn off the power saving function in the Set up menu
(p. 52).
Press the
The power goes off.
or
.
button.
*
after the
31