Nokia RM-51 Service Manual page 97

RM-51
Service Tools
9238460 (Issue 1)
SF-50
The POS flash adapter SF-50 is used in the place of phone's normal
battery during service, to supply a controlled operating voltage and to
connect to flash pads. See also "POS Flash concept".
Instructions
1 Close MMC Lid before inserting the Flash Adapter.
2 Open the slide in arrow direction as shown in the picture.
3 Insert the Flash Adapter like a battery, start at the battery connector
side.
4 Now, push down the phone, do not use too much force. Move the slide
towards the device to connect it with the DC-Jack.
5 Use the shown order to remove the phone from the Flash Adapter.
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
POS (point of sales)
flash adapter
Nokia Customer Care
0780416
Page 4–13