Table of Contents
Advertisement
RM-51
RF troubleshooting
5.
Make sure the dongle is connected and start Phoenix.
6.
In Phoenix, choose: File -> Open Product -> RM-51 Product Menu.
7.
Select Testing -> RF Controls.
8.
In the toolbar: set Operating Mode to Local.
9.
Select Band: GSM900, GSM1800 or GSM1900.
10. Set Operation Mode to Burst.
11. Set Active Unit to Tx.
12. Set Tx Data Type to All 1.
13. Set Rx/Tx Channel to 37 for GSM900, 700 for GSM1800, or 661 for GSM1900.
14. Set Tx PA Mode to Free.
15. Set Tx Power Level to 5 for GSM900, otherwise to 0.
Results
Phoenix should now look like this:
9238460 (Issue 1)
Figure 137 Preparing for transmitter troubleshooting
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Nokia Customer Care
Page 7–23
Advertisement
Table of Contents
Troubleshooting
