Table of Contents
Advertisement
Table 4-2. Agilent 83482A Optical Channel Vertical Specifications (Continued)
Maximum
dc Offset Range
Connector Type
. Input Return Loss
Calibrated Wavelength
Average Power Monitor
Specified Operating Range
Factory Calibrated Accuracy (20
User Calibrated Accuracy (>5
change)
Maximum Specified Input Power
Maximum Safe Input
Wavelength Range
a. It is recommended that a user vertical calibration be performed after every 10 hours of continuous use or if the temperature has changed
°
by greater than 2
C from the previous vertical calibration.
∆
b. Where
T
represents the temperature change in Celsius from the last user vertical calibration. Note that the temperature term goes to
cal
zero upon execution of a vertical calibration.
Table 4-3. Electrical and Optical Channels
Temperature
Operating
Non-operating
Humidity
Operating
Non-operating
µ
500
W/div
+1 mW to –3 mW, referenced to two divisions
above bottom of screen
µ
9/125
m single mode, user selectable connector
30 dB (HMS-10 connector)
1310 nm and 1550 nm
–27 dBm to +3 dBm (2
°
°
±
C to 30
C)
5% of reading
°
±
C temp
2% of reading
2 mW
10 mW peak
1000 to 1600 nm
°
15
C to +35
°
–40
C to +70
up to 90% relative humidity (non-condensing) at
up to 95% relative humidity (non-condensing) at
Specifications and Regulatory Information
µ
W to 2 mW)
±
±
100 nW
connector uncertainty
±
±
100 nW
power-meter uncertainty
°
C
°
C
Specifications
≤
°
35
C
≤
°
65
C
4-5
Advertisement
Table of Contents
