Table of Contents
Advertisement
C A U T I O N
Channel Setup Menu
The Agilent 83482A Optical/Electrical Plug-In Module
Getting the best performance
To ensure you obtain the specified accuracy, you must perform a plug-in mod-
ule vertical calibration. The calibration must also be performed when you
move a plug-in module from one slot to another, or from one mainframe to
another. Refer to Chapter 3, "Calibration Overview" for information on per-
forming a plug-in module vertical calibration.
Installing the plug-in module
You do not need to turn off the mainframe to install or remove the plug-in
modules. Refer to "Step 2. Install the Plug-in Module" on page 1-4 for informa-
tion on installing the plug-in module.
NOTE
If you wish to use the Agilent 83482A optical plug-in module in an Agilent 54750A digi-
tizing oscilloscope, a firmware upgrade must first be installed. Order the Agilent 83480K
communications firmware kit and follow the installation instructions.
Do not use extender cables to operate the plug-in module outside of the
mainframe. The plug-in module using extender cables can be damaged by
improper grounding when using extender cables.
2-6
Advertisement
Table of Contents
