Table of Contents
Advertisement
C A U T I O N
C A U T I O N
Getting Started
Getting Started
Getting Started
The instructions in this chapter show you how to install your Agilent 83482A
optical/electrical plug-in module.
Refer to Chapter 2, "Channel Setup Menu" for information on operating the
plug-in module.
Refer to Chapter 3, "Calibration Overview" for calibration information.
Refer to Chapter 4, "Specifications and Regulatory Information" for informa-
tion on operating conditions such as temperature.
For GPIB programming information, refer to the Agilent 83480A, 54750A
Programmer's Guide supplied with the mainframe. For service information,
refer to the optional Agilent 83482A Service Guide.
This product is designed for use in INSTALLATION CATEGORY II and
POLLUTION DEGREE 2, per IEC 1010 and 664 respectively.
The input circuits can be damaged by electrostatic discharge (ESD).
Therefore, avoid applying static discharges to the front-panel input connectors.
Before connecting any coaxial cable to the connectors, momentarily short the
center and outer conductors of the cable together. Avoid touching the front-
panel input connectors without first touching the frame of the instrument. Be
sure that the instrument is properly earth-grounded to prevent buildup of
static charge.
1-2
Advertisement
Table of Contents
