Fujitsu SCENIC 800 Manual page 35

Installing and removing drives
²
Take the new drive out of its packaging.
²
Make the required settings on the drive (if necessary, on installed drives as well).
²
Slide the drive into the system unit (1).
²
Plug the connectors of the data cable and the power supply cable into the drive (2).
²
Fasten the drive with the screws (3).
²
Close the system unit (see
If necessary, you must adapt the entry for the drive in the Setup menu.
i
A26361-K516-Z100-1-7619
2
"Assembling the system
3
unit").
System expansions
1
35