Table of Contents
Advertisement
Timer Sleep Filter
Timer Sleep Filter
CONNECT
CONNECT
ON/OFF
1. Press the power button to turn on the air conditioner.
ON/OFF
NOTE: When the air conditioner is turned on for the first time
after it is plugged in, the display will show the current set
temperature and will run in the ECO control .
After cleaning and replace the filter, press the POWER
button for resetting and the FILTER light will go off.
2. Select mode. See "Mode".
3. Select fan speed. See "Fan".
4. Set temperature. See "T emperature ".
Mode
1. Press MODE repeatedly until you see the indicator light glow
for the desired setting.
2. Choose Fan, Dry, Cool, Eco, or Heat.
FAN to select Fan Only mode.
■
Dry - Dries the room. The air conditioner automatically
■
selects the temperature. Fan runs on Low speed only.
Cool -
Cools the room.
■
Eco -
Cools the room and save energy.
■
Heat - Heats the room.
■
NOTE: Heat is available for heating models.
NOTE:
Dry mode should not be used to cool the room.
Fan - Only the fan runs. Press FAN to select High,
Med or Low.
Select ECO mode to initiate this function. The
NOTE:
fan will continue to run after the compressor shuts off
for 2 minutes(4 minutes for the first time)，so the fan
will shuts off for 10 minutes .The fan then cycles
run for 2 minutes and 10 minutes off intervals
until the room temperature is above the set
temperature, at which time the compressor turns
back on and Cooling resumes. ECO mode is only
available for E-star models.
Dry
Dry
Fan
Fan
MODE
MODE
Starting Your Air Conditioner
High
High
Low
Low
Med
Med
FAN
FAN
Cool
Cool
Eco
Eco
Heat
T emperature
Press the plus UP
■
time you press or hold the plus
temperature will go up 1°F (1°C) until it reaches 86°F (30°C).
Press the minus DOWN
■
time you press or hold the
will go down 1°F (1°C) until it reaches 61°F (16°C).
To change the temperature display from F to C
Press both the MODE and
t ime for 5 seconds to switch the display from °F to °C.
Fan
NOTE: The Fan button will operate only when the Cool,
Fan or Power Saver mode has been selected.
1. Press FAN until you see the indicator light glow for
the desired setting.
2. Choose High, Med Low.
High - for maximum cooling
■
Med - for normal cooling
■
Low - for quieter cooling
■
NOTE:
In ECO mode,the Fan will ran at low
■
speed when compressor turn off.
11
Dry
Dry
Fan
Fan
Cool
Cool
Eco
Eco
Heat
MODE
MODE
∧
(
)
button to raise the temperature. Each
∧
UP (
)
button, the
∨
(
)
button to lower the temperature. Each
∨
DOWN (
)
button, the temperature
°
∨
DOWN (
)
buttons at the same
,
High
High
Low
Low
Med
Med
FAN
FAN
■
ON/OFF
° :
Hide quick links:
Advertisement
Table of Contents
