Discount Car Stereo C5CD-HF Quick Start Manual

Bluetooth adapter kit for 1994-07 corvette
Hide thumbs Also See for C5CD-HF:

Advertisement

Quick Links

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
C5CD-HF
QUICK START BLUETOOTH INSTALLATION GUIDE FOR SELECT1997-04 CORVETTE WITH 12-DISC CD CHANGER

Advertisement

Table of Contents
loading

Summary of Contents for Discount Car Stereo C5CD-HF

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 C5CD-HF QUICK START BLUETOOTH INSTALLATION GUIDE FOR SELECT1997-04 CORVETTE WITH 12-DISC CD CHANGER...
  • Page 2 Voice recognition application (Siri, Google Now etc.) initiate phone calls, switch between sources and more. Thanks to the C5CD-HF Kit users retain C5 original radio and CD changer while enjoying Bluetooth features only available on newer cars.
  • Page 3 Retain CD changer playback: With this option, the required 12-disc CD changer functionality is retained. Installation: 1. Connect harness right angle plug (See Fig. 3) to module pigtail jack (See Fig. 5) 2. Connect harness straight plug (See Fig. 3) to module “CD” input jack (See Fig. Proceed to step 4 on page 4 AUX input (Forfeit CD changer playback)
  • Page 4 AUX Jack+ changer playback: For the best of both worlds, we recommend this option, whereby uses retain CD changer functionality plus an AUX input jack to which they can connect and play many portable audio devices. Installation: Connect harness right angle plug (See Fig. 3) to module pigtail jack (See Fig.
  • Page 5 4. Note: This step not required for purchases past July 19, 2021. Skip to step 5. Tap/Connect accessory wire (RED) to suitable ACC (Accessory) supply in vehicle. We suggest one of the following accessory supply options: - In 1997-03, locate yellow wire on 3-pin plug under passenger toe board near BCM (may be covered with black duct tape).
  • Page 6: Usb Charging Port

    USB charging port (not for thumb drives etc.) Module built-in USB charging port supports 1.8A charging current which may or may not be enough to charge newer power-hungry device (e.g., iPhone 8, 11, 12 etc.). Should you decide to use it, we suggest one of 3 connecting options: A.
  • Page 7: Bracket Mount

    Bracket Mount (No drilling) Locate a flat surface at location of choice within 3.2 ft. of module and mount USB support bracket (See Fig. 15) to surface using adhesive/tape or screws (included). Fig. 12 Module USB port 3. Snap USB head (See Fig. 13) in place and flush with mounting surface (See Fig.
  • Page 8: Bluetooth Pairing And Connection

    Optional 3.5-USB cable Bluetooth pairing and connection (not for thumb drives) Purchase optional 3.5-USB cable to place USB charging port and 3.5mm ports in This process must be carried out upon initial install after which the module one convenient location on dashboard etc. This adapter serves same purpose of automatically reconnects with paired phone upon turning ignition key.
  • Page 9: Bluetooth Operation

    2. Use radio volume button to set playback level (A2DP) see Table2 3. Bluetooth operation possible from push button commands listed below Table 1 Music commands Modules A2DIY-C5CD C5CD-HF A2DIY-C5 C5-HF Retains changer playback YES* Proceed this way Requires working CD changer...
  • Page 10: Frequent Asked Questions

    To return to music streaming press and release control button. (Single press) © 1995-Sep-21 Discount Car Stereo, Inc. All rights reserved. Information in this document is subject to change without notice. Other products and companies referred to herein are...

Table of Contents