Control Assembly Features; Control Panel Buttons; Single Buttons - Kurzweil CUP2 Service Manual

Introduction

Control Assembly Features

Figure 1-2

Voices——Select the Voices button, then press the Next or Previous button to sequentially step

through the 88 available voices. Each voice is assigned to a key on the keyboard (A0––C8). To

directly access a voice, press and hold the Voice button then press and release its assigned key.

For a complete list of the 88 available voices and their corresponding keys, consult the CUP2

User’'s Manual.

Piano——Select the Piano button to immediately access Grand Piano voice.

Layer——Press the Layer button to layer a second voice over the currently selected voice. Use the

Next or Previous button to select the second voice; or press and hold the Layer button, then

press and release the voice’'s assigned key. You can also adjust the volume, change the

transposition of the layered voices, and save the layered keyboard and adjusted voices.

Split——Press the Split button to split the keyboard into two sections. Select the rst voice then

press the Split button and select the second voice. Use the Next or Previous button to select the

second voice; or press and hold the Split button, then press and release the voice’'s assigned

key. You can also adjust the volume, change the transposition of the split keyboard, change the

split point (default split point is between B3 and C4), and save the split keyboard and adjusted

voices.

Favorite 1, Favorite 2, or Favorite 3——Use these buttons to save or recall user modied voices

and split keyboards. Depending on the mode, these buttons also have special functions

(Volume, Split Point, and Tempo) that are applicable when layering voices, creating split

keyboards, using the metronome or playing a rhythm pattern.

Rhythm button——Select the Rhythm button, then press the Play/Stop button. Use the Next or

Previous button to sequentially step through the 78 available rhythm patterns. Each rhythm

pattern is assigned to a key on the keyboard (A0––D7). To directly access a rhythm pattern,

press and hold the Rhythm button then press and release its assigned key. For a complete list

of the 78 available rhythm patterns and their corresponding keys, consult the CUP2 User’'s

Manual.

1- 2

Control Assembly control panel

Demo

Table of Contents

Show Quick Links